         
            |
TMI, LLC
5350 Campbells Run Road
Pittsburgh, PA 15205
800.888.9750
Phone: 412.787.9750
Fax: 412.787.3665
Email
Curtron |
 |
|
SAVE-T®
Polar-Pro™ Swinging Door.
For Walk-In Doors on Freezers, Coolers and Personnel Doors
 |
The
USDA Polar grade PVC material is attached to the bracket in such
a way that the doorway opening is completely covered, even around
the hinge parts.
This unique
door design allows the main cooler or freezer door to be closed
without interference.
All hardware
is constructed of stainless steel with a lifetime warranty against
corrosion. The closing mechanism is adjustable to increase or decrease
the speed at which the door closes. |
 Even
Plane Design
TMI
Polar-Pro™ Swinging Doors allow fast and easy access to walk-in coolers/freezers,
especially in high traffic or product sensitive areas. The unique and
revolutionary “swinging hardware” design allows the door to
open in and out on an even plane, and is the only hardware that maintains
a tight seal along the top of the door opening and around all hinge parts.
This stainless steel hardware system is also the only fully adjustable
system for in-jamb alignment, as well as, the opening and closing speed
of each panel.
 3
Sizes
With three sizes, the Polar-Pro™ can be applied to
door openings up to 60'' wide and door heights up
to 108''.
UNIVERSAL
MOUNT
The majority of all walk-in cooler and freezer doors are
flush with the inside wall when closed. Our Polar-Pro hardware is designed
and engineered to fit every application because it is installed inside
the cooler or freezer on the wall surface, next to the doorjamb.
Exclusive
Adjustments Only on Polar-Pro™ Doors
 If
cooler/freezer door is out of alignment, loosen slide bar nuts and adjust
panel to create a tight seal.
 If
the spring tension needs to be adjusted, use an hex wrench to tighten
or loosen the tension screw, altering the door speed.
|
|
